7
RECEIVER UNIT DESCRIPTIONS
1
IR Extender Port
Connect an IR extender to this port.
2
CAT-5 Input Port
Connects the Receiver to the Sender unit using CAT-5 cabling.
3 IR
Sensor
Receives signals from the 3D source IR remote control. The IR signals are sent
back to the source device, when using an IR Blaster on the Sender.
4
Locking HDMI Port
Connect a 3D display to this HDMI port. Please see the Features section on
page 3 for supported HDMI 1.3 features.
5 Power
Indicator
This LED will turn bright red once the included 5V DC locking power supply has
been properly connected to the unit and the locking power supply has been
connected to an available wall outlet.
6
5V DC Locking Power Connector
Connect the included 5V DC locking power supply to this connector. Only use
the power supply shipped with this unit.
