PANEL LAYOUT
Back
Front
3
RS-232
Port
IR receiver
(optional)
HDMI
Output
Optical
Input
Analog
Input
Overscan
5V DC
Input
Main Power
Switch
NOTE:
1. OVERSCAN Button
By default the Gefen TV Signal Generator is set to underscan mode. If your
video signal does not fill the entire display, press this button once to switch
to overscan mode. You can press the button a second time to revert to
underscan mode.
2. HDMI OUT
The HDMI output can be connected to an HDMI display using HDMI cable or
to a DVI display using HDMI to DVI cable or Gefen adapter from HDMI to DVI.
3. RS232 Communication Port
Connect to the COM1 or COM2 port of your PC to control the unit remotely
using the appropriate application.
