Gefen GEF-DVI-FM2000, User Manual, Page: 8 / 15

5
SENDER UNIT DESCRIPTIONS
5
SENDER UNIT DESCRIPTIONS
1 Status
This LED indicator will glow bright blue, indicating that there is a valid connection between the Sender
Unit and Receiver Unit. This LED will glow red when there is an interruption in the signal between the
Sender Unit and the Receiver Unit.
2 Power Receptacle
Connect this cable to the included 5 V DC power supply, if required.
3 SC Fiber Connectors
Connect two SC Fiber Optic cables from the Sender Unit to the Receiver Unit. Make sure that the
Fiber Optic cables from both port A and B are connected to the same ports on the Receiver Unit. See
page 8 for details.
4 DVI Input
Connect this part of the Sender Unit to the DVI port on the computer.
1 Status
This LED indicator will glow bright blue, indicating that there is a valid connection between the Sender
Unit and Receiver Unit. This LED will glow red when there is an interruption in the signal between the
Sender Unit and the Receiver Unit.
2 Power Receptacle
Connect this cable to the included 5 V DC power supply, if required.
3 SC Fiber Connectors
Connect two SC Fiber Optic cables from the Sender Unit to the Receiver Unit. Make sure that the
Fiber Optic cables from both port A and B are connected to the same ports on the Receiver Unit. See
page 8 for details.
4 DVI Input
Connect this part of the Sender Unit to the DVI port on the computer.