manualshive.com logo in svg

Gefen GEF-DVI-2-HDSDIPRO, User Manual

Share
Download
Gefen GEF-DVI-2-HDSDIPRO User Manual Download Page 29

26

RS-232 CONTROL

The GefenPRO DVI to HDSDI Scaler Pro can accept commands through the 
RS-232 serial communications port located on the rear panel. RS-232 can be 
used to control many of the product’s features which are also controlled using 
the IR Remote Control Unit.  Refer to the HDSDI RS-232 Serial Communications 
Manual on the Gefen web site for details on using the RS-232 interface.

5 4 3 2 1

9 8 7 6

1 2 3 4 5

6 7 8 9

Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface

RS-232 Settings

Bits per second ........................................................................................... 115200  

Data bits ............................................................................................................... 8

Parity ............................................................................................................. None

Stop bits ................................................................................................................1

Flow Control .................................................................................................. None

Summary of Contents for GEF-DVI-2-HDSDIPRO


































Reviews:

No comments

Brands by name

Popular brands

Load more brands