page | 41
2.
Select the desired configuration file from your computer. After the file has been
selected, the filename will appear next to the
Browse...
button.
3. Click the
Restore
button to upload the file.
►
Firmware Update
Uploads and applies the latest firmware file to the switcher.
1.
Download the latest firmware from the Gefen web site.
2. Click the
Browse...
button.
3.
Select the firmware file on your computer.
The firmware must be a
.bin
file and will have the following naming
convention:
EXT-UHD600-41([version])(PACK).bin
.
4. Click the
Update
button.
The following message box will be displayed:
WARNING: Updating the firmware may overwrite some
of your settings. Consider saving the configuration
before updating the firmware. Are you sure you want
to continue?
To save the configuration, before continuing, click the
Cancel
button on the
message box. Refer to the section
Download Current Configuration to PC
.
B
asic Oper
ation
The Web Interface
Summary of Contents for EXT-UHD600-41
