Gefen EXT-UHD600-41 User Manual Download Page 4

Page: 4 / 136

Licensing

This product uses software that is subject to open source licenses, including one or more

of the General Public License Version 2 and Version 2.1, Lesser General Public License

Version 2.1 and Version 3, BSD, and BSD-style licenses. Distribution and use of this

product is subject to the license terms and limitations of liability provided in those licenses.

Specific license terms and Copyright Notifications are provided in the source code.

For three years from date of activation of this product, any party may request, and we

will supply, for software covered by an applicable license (e.g. GPL or LGPL), a complete

machine-readable copy of the corresponding open source code on a medium customarily

used for software interchange. The following software and libraries are included with this

product and subject to their respective open source licenses:

•

jQuery

•

Linux

Summary of Contents for EXT-UHD600-41









































































































































Search results

Summary of Contents for EXT-UHD600-41

Reviews:

Related manuals for EXT-UHD600-41

Brands by name

Popular brands

Gefen EXT-UHD600-41, User Manual

Search results

Summary of Contents for EXT-UHD600-41

Reviews:

Related manuals for EXT-UHD600-41

Brands by name

Popular brands