USING THE HOME THEATER SCALER
1.
2.
3.
4.
8
Connect all the sources to the HDMI and/or Component Inputs to the Home
Theater Scaler.
Connect the HDMI/DVI displays to the DVI output, with the proper cable and/or
adapter, on the Home Theater Scaler.
Connect the 5VDC power supply to the Home Theater Scaler.
Controlling the Home Theater Scaler using the RMT-SR-IR:
By Pressing...
Does...
input select
changes between sources
output select
changes between display outputs
power
power the scaler on/off
menu
bring up the on screen menu
exit
allows user to exit the on screen menu
up,down,left,right
allow user to navigate through menu
ok (enter)
allows user to confirm their selection
rest
press the button to reset the unit’s
firmware setting to the factory default value.
auto adjust
press the button to optimize the
position of the picture (picture centering) on the screen.
*Note for computers connected to the Home Theater Scaler -
When your com-
puter boots up, it looks for an EDID (extended display identification data) from the
display to tell it what monitor is connected and what resolution to output. During
boot up of the computer you should have the DVI input selected so that the com-
puter gets the EDID of the display that is selected.
This step can also be eliminated by using a DVI Detective.
