Gefen EXT-HDMI1.3-143, User Manual

Page: 19 / 26

page | 9
Internal EDID
Use this EDID mode if problems are encountered when using the external EDID.
The built-in internal EDID provides the source device with a “generic” EDID which
can be used by all display (sink) devices.
1. Select the internal EDID mode. Refer to Selecting the EDID Mode (page 8) .
2. The Int LED indicator on the front panel will be illuminated.
3. Press and release the Reset button on the back panel of the splitter to reset the unit.
The splitter must be reset (or power-cycled) each time the EDID mode is switched.
The table, below, displays the video timings and audio formats supported by the
internal EDID.
Video Timings Audio Formats
1280 x 720p @ 50 Hz
1280 x 720p @ 59.94 / 60 Hz
1920 x 1080i @ 50 Hz
1920 x 1080i @ 59.94 / 60 Hz*
720 x 480p @ 59.94/60 Hz
720 x 576 @ 50 Hz
1920 x 1080p @ 50 Hz
1920 x 1080 @ 59.94 / 60 Hz
1440 x 480p @ 59.94 / 60 Hz
1440 x 576p @ 50 Hz
LPCM (2CH),
Dolby Digital (2CH/5.1CH),
DTS Digital Surround™
(2CH/5.1CH)
* Native resolution
NOTE:
All sink devices connected to the splitter must be compatible
with at least one resolution / audio format specified in the internal
EDID. If one of the connected displays does not support xvYCC,
then this feature is removed from the EDID.
EDID Management
Operating the 1:3 Splitter for HDMI 1.3