7
DIP SWITCH GUIDELINES
Inside the 2X2 HDMI Switcher is a bank of Dip Switches. Below is a table describing
their functions. By default, all switches are set to the Off position.
Dip Switch #
Name
Description
1
Switching Delay
Adds a 3 second delay to switching
2
On Board EDID
Feeds a Generic HDMI EDID to all Inputs
3
IR Code Dip Switch
Corresponds to Dip Switch 1 on RMT16-IR
4
IR Code Dip Switch
Corresponds to Dip Switch 2 on RMT16-IR
5
Unused
6
Unused
7
Unused
8
Edge Select
+Edge Pixels
How to open the 2x2 HDMI Switcher:
To access the dip switches, fi rst remove the 2 hex nuts on the back of the unit (2 for
RS232 port). Remove the 5 Philips screws under the unit and the 4 screws on each
side of the unit. Now carefully remove the cover of the 2x2 HDMI Switcher.
2
3
4
5
6
7
8
1
