41
RS-232 / TELNET COMMANDS
#set_telnet_pass Command
The #set_telnet_pass command sets the Telnet password. The underscore
characters (“_”) must be included when typing the command name.
The maximum length of the password is 20 characters. The password is
case-sensitive. The default Telnet password is
Admin
.
Syntax
y
:
#set_telnet_pass param1
Parameters:
param1
Password
Notes:
The matrix must be rebooted after executing this command.
Example
p :
#set_telnet_pass OK_Corral
TELNET Interface Password Is Set.
