Gefen EXT-HD-SL-444, User Manual, Page: 114 / 166

page | 104
Commands
#set_edid
The
#set_edid
command sets the specified EDID type to an input or bank. Note that the
argument for param2 is dependent upon the value of param1 . Similarly, the argument for
param4 is dependent upon the value of param3 .
Syntax
#set_edid param1 param2 param3 param4
Parameters
param1 Source
Source Description
int
Uses default (Internal) EDID
bank
Uses EDID bank
output
Uses EDID on Output (sink)
param2 * Source [1 ... 8]
Source Description
1 ... 2
1 = 1080p / 2CH
2 = 1080p / Multichannel
1 ... 8
EDID bank
1 ... 4
Output
* When specifying param2 , the available arguments will
depend upon the value of param1 :
If param1 = int , then param2 must specifiy an internal EDID
from 1 to 2. If param1 =
bank
, then param2 must specifiy an
EDID bank from 1 to 8. If param1 = output , then param2
must specify an output from 1 to 4.
(continued on next page)
Advanced Operation