page | 8
Ge
tting S
tar
ted
DIP Switches
On the bottom of the Receiver unit are a bank of DIP switches. DIP switch 1 controls EDID
management. DIP switch 2 is not used.
EDID Management
The DVI KVM Extra Long Range Extender Over One CAT5 provides EDID management.
The Sender unit can use the EDID from the sink device (downstream EDID) or the built-in
default EDID. Set DIP switch 1 to the ON (up) position to use the external (downstream)
EDID. Set DIP switch 1 to the OFF (down) position to use the internal EDID.
Description
DIP Switch Setting
Internal EDID mode
•
DIP 1 = OFF (default)
•
Uses the internal EDID on the Sender unit.
External (downstream) EDID mode
•
DIP 1 = ON
•
Allows all video and audio features of the connected device
to be passed to the source device.
•
This mode must be used to pass HDCP content.
EXT-DVIKVM-ELRR
Service
Link
DVI Out
USB
5V DC
Link
USB
Power
DVI KVM ELR Extender over one CAT-5 R
®
2 E
1 2
ON TD402
EXT-DVIKVM-ELRR
Service
Link
DVI Out
USB
5V DC
Link
USB
Power
DVI KVM ELR Extender over one CAT-5 R
®
2 E
1 2
ON TD402
DIP switches
Receiver unit
EXT-DVIKVM-ELRR
Service
Link
DVI Out
USB
5V DC
Link
USB
Power
DVI KVM ELR Extender over one CAT-5 R
®
2 E
1 2
ON TD402
EXT-DVIKVM-ELRR
Service
Link
DVI Out
USB
5V DC
Link
USB
Power
DVI KVM ELR Extender over one CAT-5 R
®
2 E
1 2
ON TD402