CONNECTING AND OPERATING THE 2x1 DVI KVM SWITCHER
How to Connect the 2x1 DVI KVM Switcher to your devices
(Please refer to the Panel Descriptions diagram on the next page as needed)
1-
Connect the supplied cables from your fi rst computer into the DVI In 1, USB In 1,
and Audio In 1 connection in the back of the 2x1 DVI KVM Switcher.
2-
Connect the supplied cables from your second computer into the DVI In 2, USB In 2,
and Audio In 2 connection in the back of the 2x1 DVI KVM Switcher.
3-
Connect the monitor to the DVI Out connection.
4-
Connect your USB devices (e.g. keyboard, mouse) into the USB Out.
5-
Connect your speakers to the Audio Out.
6-
Plug the 5V DC power supply into the 2x1 DVI KVM Switcher.
How to Operate the 2x1 DVI KVM Switcher
1-
Use the front panel push button to switch between sources, or use the optional RMT-2
wired remote control to remotely toggle between sources.
Operation Notes
When turning on or rebooting your computers, the 2x1 DVI KVM Switcher must be se-
lected to the computer that is booting until the computer completes the boot cycle. This
step can be eliminated using the Gefen DVI Detective.
If you lose your picture when switching from source 1 to source 2 or vice-versa you will
require a DVI Detective.
If you are experiencing USB dropouts try using the switcher just as a USB hub by only
connecting the USB cables from your computers to the switcher. Connect your devices
to the USB out portion of the switcher and connect your display to your computer direct-
ly. Start your computer up and try switching. If your USB devices do come up normally
then you will need a DVI Detective to negotiate the video/USB signals for faster switch-
ing. If they do not come up normally, then you will need to call tech support.
3