9
DIP SWITCH CONFIGURATION
Sender Unit
There are two (2) DIP switches on the bottom of the Sender Unit. Each DIP
switch performs a different function.
DIP Switch 1 - Green Mode (Default = ON)
• OFF
- Enable Green Mode
When DIP switch 1 is set to the OFF position, the Sender Unit is powered
only when 5 V is present on the HDMI / DVI cable. Automatic Power Mode
consumes less than 1 Watt of power.
• ON
- Disable Green Mode
If DIP switch 1 is set to the ON position, then the Sender Unit is placed in
Power Always Mode. In this mode, the Sender Unit is always powered.
DIP Switch 2 - Not Used
•
Reserved for future expansion.
