background image

CONNECTING AND OPERATING THE  DVI SL/DL Splitter

How to Connect the DVI SL/DL Splitter to your devices

1.  Connect the supplied Dual Link DVI cable from the back of the computer into 

the input of the DVI SL/DL Splitter.

2.  Connect the cable from your fi rst display (monitor or projector) into the DVI 

Out 1 slot on the DVI SL/DL Splitter. (this will be what the computer will 
recognize)

3.  Connect the cable from your second display (monitor or projector) into the 

DVI Out 2 slot on the DVI SL/DL Splitter.

4.  Plug the 5V power supply into the DVI SL/DL Splitter.

5.  Plug the 5V wall mount power supply into the wall outlet. 

6.  Restart your computer only after you’ve made all the connections. 

7.  Adjust the EQ to resolve any imperfections in the image.

*

Note: 

Only output #1 of the DVI SL/DL Splitter is HDCP pass-through

.

4

Input Equalization 

Adjustment

The external equalization knob can be used to balance out signal noise resulting 
from long cables for better picture quality.  By turning the equalization knob  
counter-clockwise you will eliminate any noise and/or degradation in the signal. 
You should be able to fi nd a “sweet spot” somewhere in the middle.

EQUALIZATION CONTROL

Summary of Contents for EXT-DVI-142DL















Reviews: