RS-232 COMMANDS
#USE_TELNET_PASS Command
The #USE_TELNET_PASS command enables / disabled the use of a Telnet
password during the login process.
Syntax:
#use_telnet_pass param1
Parameters:
param1
State
[0 - 1]
Value
Meaning
0
Disable password
1
Enable password
General Commands
Command
Description
#activebolo
Activates the bootloader
#fadefault
Resets the Switcher to the default routing state
#irrmtadd
Sets the IR address for the Switcher
#lockpower
Toggles the lock power state
#stbymode
Toggles Standby (power OFF) Mode
#ACTIVEBOLO Command
The #ACTIVEBOLO function activates the bootloader. This command is required
in order to begin the firmware update procedure. See page 26 for details.
Syntax:
#activebolo
Parameters:
None
Notes:
This command must be executed
twice
, in order to active the bootloader.
