9
1 IR
Receiver
This receiver will receive commands from both the included RMT-4IR remote
control and from other commercial IR remote controls. IR commands from
commercial IR remote controls are relayed from this unit back to the 4x4
Component Audio Over CAT-5 sending unit where they will be output by the
attached IR Blasters.
2
Selected Source LED
The currently selected source that is being displayed on the attached monitor
will be visually acknowledged by an active LED. There are 4 LEDs, one for each
source.
3
Brightness & Focus Adjustment Trim Pots
Brightness and focus Trim Pots are available for fi ne tuning the output video
signal. Please see page 12 for more information and instructions on usage.
4
5V DV Power Input
Connect the included 5V DV power adapter to this input. Once a proper
connection is made the power LED indicator should become active.
5
Component Video Output
Connect the component display to this output using user supplied cables.
6
CAT-5 Extension Port
Connect a user supplied CAT-5e cable between the CAT-5 extension ports on
the 4x4 Component Audio Over CAT-5 sending unit and this port.
7
Analog RCA Stereo Audio Output
Connect this output to either the display’s analog audio input or a receiver’s
analog audio input using user supplied analog audio cables.
8
Digital Coaxial Audio output
Connect this output to either the display’s digital coaxial audio input or a
receiver’s digital coaxial audio input using a user supplied digital coaxial audio
cable.
9
Digital Optical Audio output
Connect this output to either the display’s digital optical audio input or a
receiver’s digital optical audio input using a user supplied digital optical audio
cable.
10 IR Extension Port
Connect the optional IR Receiver Extension (part# EXT-RMT-EXTIR) to this
port.
11 Direct Select Buttons
Use buttons 1 through 4 to select what source the connected display will be
view.
4X4 COMPONENT AUDIO OVER CAT-5 RECEIVER
PANEL DESCRIPTION
