Connecting and Operating the DVI Detective
How to Connect the DVI Detective
1- Power on your display, and connect your display to the DVI Out on the DVI Detective.
2- Plug the 5v power supply into the DVI Detective, once the LED stops blinking the DVI Detective
has finished reading the EDID of the display. After programming you will not need to use the
power supply again.
3- You can connect the DVI In into your computer with DVI cable, and connect your DVI or ADC
Switcher to the DVI Detective DVI Out.
4- Restart your computer only after you’ve made all the connections.
* If the LED does not stop blinking after 8 seconds of having the power supply connected, try
recording with the monitor on with a picture.
4
Connecting and Operating the DVI Detective
How to Connect the DVI Detective
1- Power on your display, and connect your display to the DVI Out on the DVI Detective.
2- Plug the 5v power supply into the DVI Detective, once the LED stops blinking the DVI Detective
has finished reading the EDID of the display. After programming you will not need to use the
power supply again.
3- You can connect the DVI In into your computer with DVI cable, and connect your DVI or ADC
Switcher to the DVI Detective DVI Out.
4- Restart your computer only after you’ve made all the connections.
* If the LED does not stop blinking after 8 seconds of having the power supply connected, try
recording with the monitor on with a picture.
4
