DIP SWITCH GUIDE
if you are experiencing Infrared interference, you can change the IR code on the
Remote and the 4x1 DVI DL Switcher itself.
To change the IR code on the RMT4-IR, simply remove the battery cover and fi nd the 2
dip switches just above the batteries. These switches correspond to a set of switches
on the 4x1 DVI DL Switcher.
To change the IR code on the 4x1 DVI DL Switcher, look under the unit and fi nd a blank
silver sticker. Beneath this sticker is a bank of 4 dip switches. The fi rst 2 switches
(labelled 1 and 2) correspond to the 2 switches found on the RMT4-IR remote control.
The following are the 4 Infrared channels possible for both the RMT4-IR and the
4x1 DVI DL Switcher. The dip switches on both the remote and the switcher itself must
match in order to be operational.
1
2
Channel 0:
1
2
Channel 1:
1
2
Channel 2:
1
2
Channel 3:
6