4
How to Connect the ADC Repeater
to your Computer and Displays
1
1--
Connect the DVI cable from the back of the computer into the
the “DVI In” on the front of the ADC Repeater. If you have a Macintosh
with ADC, you must connect an ADC to DVI Connector first.
2
2--
Connect your ADC monitor to the “ADC out” connection in the front of
the ADC Repeater.
3
3--
Plug the 24v power supply into the ADC Repeater.
4
4--
Restart your computer only after you’ve made all the connections.
*If you want to use the USB ports on the back of the ADC monitor,
you need to use an ex
•
tend
•
it USB•100 or an ex
•
tend
•
it USB•400.
*Attention 23” HD Cinema Display Users:
For optimal performance of this device and the 23” HD Cinema Display
you must move jumper
E
to Jumper
I
located at
JP8
on the mainboard.
3
5
6
Wiring Diagram
•
Extends computers with ADC
(or DVI) graphics card to ADC
compatible monitors
•
Extends any Apple Flat Panel
Display up to 330 feet from the
computer.
•
Maintains highest DVI single
link video resolution
•
Supports Apple Flat Panel Displays
•
Supports DDWG standard for
DVI compliant monitors
•
Installs in seconds
•
DVI cable is used to connect the
computer to the DVI input and the
flat panel display connects to the
ADC port on the ADC Repeater
output
7
8
Technical Support:
phone:
818-
772-9100
fax:
818-
772-9120
email:
s
upport
@gefen.com
web:
www.gefen.com
Technical Support Hours:
8:
00 am – 5:00 pm PST
Monday -– Friday
Write to:
Gefen, Inc.
c/o Customer Service
2
0600 Nordhoff St.
Chatsworth,
CA 91311
USA
Asking for Assistance
Trademarks:
Macintosh is a trademark of Apple
,
Inc.
ex
•
tend
•
it is a trademark of Gefen Inc.
The ADC Repeater is a trademark of Gefen Inc.
© Copyright 2003 Gefen Inc. All Rights Reserved
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
front view
Features
Specifications:
DVI Amplifier Bandwidth:
1.65 GHz
Actual Bandwidth:
1.6 GHz
Input Video Signal:
1.2 volts p-p
Input DDC Signal:
5 volts p-p (TTL)
DVI Connector:
29 pin female
ADC Connector:
35 pin female
Power Consumption:
60 Watts (max.)
Power Supply:
External 24 VDC
Dimensions:
2.75”W x 1”H x 4.5”D
Shipping Weight:
5 lbs.
Technical Specifications