5
DIP SWITCH GUIDELINES
Inside the 1x8 DVI Splitter is a bank of Dip Switches. Below is a table describing their
functions. By default, all switches are set to the Off position. By default, all switches are
set to the Off position.
Dip Switch #
Name
Description
1
Switching Delay
Adds a 3 second delay to switching
2
On Board EDID
Feeds a Generic HDMI EDID to all Inputs
3
Unused
4
Unused
5
Unused
6
Unused
7
Unused
8
Edge Select
+Edge Pixels
How to open the 1x8 DVI Splitter:
To access the dip switches, fi rst remove the 18 hex nuts on the front of the unit
(2 located on each DVI port and 2 on the DVI port on the back). Remove the 5 Philips
screws under the unit and the 4 screws on each side of the unit. Now carefully remove
the cover of the 1x8 DVI Splitter.
1
2
3
4
5
6
7
8
