page | 13
Routing Inputs to Outputs
To the left of each row of LED indicators, there are two push-buttons labeled
Out 1
and
Out 2
. To change the routing state of an output, press and release the button of the
desired output to advance to the next input.
In the example below, the source connected to
In 5
is currently routed to
Out 2
.
To change the routing state and route
In 6
to
Out 2
, press and release the
Out 2
button.
To route another source to
Out 2
, consecutively press and release the
Out 2
button until
the desired input is selected.
Once
In 6
is selected for any of the outputs, pressing the
Out
button again will return
to
In 1
.
Routing Basics
Button for
Out 2
In 5
is routed to
Out 2
In 6
is now routed to
Out 2
Operating the 6x2 Matrix for HDMI 4K x 2K
