Gefen TOOLBOX GTB-HD4K2K-444-BLK, User Manual

Page: 56 / 114

page | 46
Advanced Operation
#set_http_port
The #set_http_port command specifies the Web server listening port. The matrix
must be rebooted after executing this command. The default port setting is
80
. Use the
#show_http_port command to display the current HTTP listening port.
Syntax :
#set_http_port param1
Parameters :
param1 Port [1 ... 1024]
Example :
#set_http_port 82
HTTP COMMUNICATION PORT 82 IS SET. PLEASE REBOOT THE UNIT.
#set_telnet_pass
The #set_telnet_pass command sets the Telnet password. The password is
case-sensitive and cannot exceed 8 characters in length. The default password is
Admin
.
Syntax :
#set_telnet_pass param1
Parameters :
param1 Password
Example :
#set_telnet_pass 3ver3st
TELNET INTERFACE PASSWORD IS SET
Commands