page | 28
Operating the 16x16 Modular Matrix for HDMI w/ HDCP
Routing Basics
Routing a Source to Multiple Outputs
The following example illustrates how to route a source to multiple outputs.
1. Press the
In / Out
button on the front panel.
2. The front panel display will indicate that routing mode is active.
3. Select an input (1 - 16) using the numerical keys on the front panel.
If an incorrect value is entered by accident, use the ← button to delete the last
number entered.
port select
IN:
port select
IN: 3
port select
IN:
+
IMPORTANT:
When routing a source to multiple outputs,
HDMI
Local Out
(Output 17) is not included as part of the routing process.
To route a source to
HDMI Local Out
, it must be performed
separately. See
.
