Gefen Pro GEF-DVI-848DL-PB, User Manual

Page: 44 / 100

40
RS-232 / TELNET COMMANDS
IP / Telnet Configuration
Command Description
#display_telnet_welcome Set Telnet welcome message on login
#ipconfig Displays all TCP/IP settings
#resetip Resets IP configuration to factory settings
#set_http_port Sets the Web server listening port
#set_telnet_pass
Prompts for password when using Telnet
#set_telnet_port Sets the Telnet listening port
#set_telnet_username Sets the user name for the login procedure
#sgateway Sets the IP gateway address
#show_telnet_pass Prompts for password when using Telnet
#show_telnet_username Prompts for user name when using Telnet
#show_ver_data
Displays the hardware and firmware
version of the matrix
#sipadd
Sets the IP address of the matrix
#snetmask Sets the IP network mask
#use_telnet_pass Use password during Telnet sessions
#display_telnet_welcome Command
The #display_telnet_welcome command sets (enables/disables) the Telnet
welcome message on login.
Syntax:
#display_telnet_welcome param1
Parameters:
param1
State [0 - 1]
State Meaning
0 Do not display welcome
message
1 Display welcome message
Example :
#display_telnet_welcome 1
Telnet welcome at login is set to ON