12
Displaying the Routing Status
From the main screen, press the
Select
button. When the arrow cursor is next
to OUTPUT, pressing the
◄
or
►
buttons on the front panel will show the current
routing state of each input and output. The example below shows that Input 1 is
routed to Output 1.
Pressing the
►
button again will display the routing state of output 2 and so on.
Note that the number displayed next to INPUT may be different than the example
above, depending upon the current routing state.
Routing Sources
Example:
Route the source device connected to In 2 to the display connected to Out 1.
1. From the Standby Screen, press the
Select
button on the front panel to
display the routing status screen.
2. Press
the
Select
button again to move the cursor to INPUT.
3. Press
the
►
button to set the source to Input 2. The source device
connected to In 2 is now routed to the monitor connected to Out 1.
4. Press
the
Cancel
button to return to the standby screen.
NOTE:
The
Cancel
button can be used to return to the standby screen at
any time.
CONNECTING AND OPERATING THE 16X16 3GSDI MATRIX
