Geemarc combi dect 295 User Manual Download Page 52

Page: 52 / 77

8.5

Base Settings using the Base

8.5.1

Set the Ringer Melody for Internal Calls

You can set special melody to personalize your base internal ringer. A total of 10
melodies are provided for your selection.

1. Press

MENU/OK

and

to select

SETTINGS

2. Press

MENU/OK

and

to select

RING SETUP

3. Press

MENU/OK

and

to select

INT. RING

4. Press

MENU/OK

and the display will show MELODY.

5. Press

MENU/OK

and

to select the desired ringer melody for internal calls.

6. Press

MENU/OK

to confirm.

NOTE:

The respective ringer melody will be played during your selection.

8.5.2

Set the Ringer Melody for External Calls

You can set special melody to personalize your base external ringer. A total of 10

melodies are provided for your selection.

1. Press

MENU/OK

and

to select

SETTINGS

2. Press

MENU/OK

and

to select

RING SETUP

3. Press

MENU/OK

and

to select EXT. RING.

4. Press

MENU/OK

and the display will show

MELODY

5. Press

MENU/OK

and

to select the desired ringer melody for external calls.

6. Press

MENU/OK

to confirm.

8.5.3

Set the Ringer Volume

You can adjust the volume level of the ringer for internal call (INT RING) and external
call (EXT RING) separately, with settings from 1 (the quietest) to 5 (loudest), or set it to
VOLUME OFF.

1. Follow steps from 1 to 3 in section 8.5.1 and 8.5.2.

2. Press

MENU/OK

and

to select

VOLUME

3. Press

MENU/OK

and

to select the desired volume level list.

4. Press

MENU/OK

to confirm.

NOTE:

The respective ringer volume will be played during your selection. If VOLUME OFF is
selected,

icon will display.

SET

Summary of Contents for combi dect 295














































































Search results

Summary of Contents for combi dect 295

Reviews:

Related manuals for combi dect 295

Brands by name

Popular brands

Geemarc combi dect 295, User Manual

Search results

Summary of Contents for combi dect 295

Reviews:

Related manuals for combi dect 295

Brands by name

Popular brands