Geemarc combi dect 295 User Manual Download Page 55

Page: 55 / 77

8.6

Registration

Your handset and base station is pre-registered. Up to five handsets can be

registered to a single base station.

If for some reason, the handset is not registered to the base station (

flashes even

when the handset is near the base station), register your handset according to the
following procedure.

On the cordless handset:

1. Press

MENU/OK

and

to select

REGISTRATION

2. If you have more than one base, press

and

to select the base

number from

BASE 1

BASE 2

BASE 3

and

BASE 4

. There will be a

behind the current registered base number.

3. Press

to display “PIN?”, enter the 4-digit system PIN for the base

(default PIN is 0000).

4. Press

and the display will show

“WAITING”.

5. At the same time, press

MENU/OK

and

on the base to

select REGISTRATION.

6. Press

MENU/OK

to see “PLEASE WAIT” flashing on the base display. After a

short delay, if the registration is successful, there will be a confirmation beep,
and the handset display will go back to idle mode with the new handset number
shown. The base display will also go back to idle mode.

7. Press

INT/MUTE/CLEAR

at any time to cancel.

Summary of Contents for combi dect 295














































































Search results

Summary of Contents for combi dect 295

Reviews:

Related manuals for combi dect 295

Brands by name

Popular brands

Geemarc combi dect 295, User Manual

Search results

Summary of Contents for combi dect 295

Reviews:

Related manuals for combi dect 295

Brands by name

Popular brands