10
Please use the strain relief mechanism as displayed. This
provides extra protection for the cable at the connection point. It
will extend the life of the power cable and reinforce the
connection to the equipment.
The LoopHEAR
TM
will need to charge for 4 hours before its first
use. The power indicator will blink red whilst the battery is
charging. When the power indicator is blinking green, the
battery is fully charged.
Locating the LoopHEAR
TM
In order to receive the optimal sound from the LoopHEAR
TM
, the
ideal location is facing the user. There are two options when
locating the LoopHEAR
TM
.
Fully Portable
The LoopHEAR
TM
can be used as a fully portable unit with or
without the base plate attached. It can be used in a variety of
locations with no setup required and can be used immediately.
Semi Fixed
If you want to ensure the LoopHEAR
TM
stays in one place then
it can be used as a semi fixed unit as follows:
1) Choose the location to fix the LoopHEAR
TM
. Please bear in mind the
range of coverage available (see below). Ensure you make full use of it
2) Remove the base plate – as described in Battery Charging above
3) Screw the base plate to the table or desktop with the screws provided
4) Replace the base plate – as described in Battery Charging above
LH100
0.8m
120°
INSTALLATION
