Turning the CLA9/CLA9T On and Off
Put the headset on. Ensure the mode switch is set to MIC (CLA9T). Roll the
On/Off Volume control wheel upwards. The On LED will display Green. Adjust
the Volume to a comfortable level by rolling the On/Off Volume control wheel.
To turn the CLA9/CLA9T off or on , roll the On/Off Volume control wheel
downwards. The Green LED will switch off and OFF will be showing on the
On/Off Volume control wheel
CLA9T only
The CLA9T can be used in rooms especially equipped with a magnetic loop
(conference …etc) due to its "built in T coil". Simply by setting the mode switch
to T, the CLA9T will receive the emitted magnetic waves then amplify them to
your headset. You will receive all the benefits of the "built in T coil".
An external microphone is supplied and can be connected in the socket "Mic" (
option for the CLA9), then set the switch to "Mic" position , in this case the "built
in T coil" is disabled
Microphone
The CLA9/CLA9T are built with an internal microphone which enables you to
hear all the surrounding sounds.
Tone and Balance Setting
The tone and Balance can be adjusted by using the controls found within the
battery compartment
.
7
USING THE CLA9/CLA9T
