18
Charging via the Charging Unit
Plug the charger into a wall socket.
Connect the lead from the charger into the the socket on
the back of the charging unit.
Place the mobile phone onto the charging unit.
The battery indicator on the LCD will fill and empty whilst
charging.
When the battery is fully charged, the indicator will
remain full and stop flickering.
Note:
Only use batteries and chargers supplied with
the telephone. The guarantee will be invalid if an
unapproved cable is used. Keep the battery contacts
clean and free of dirt. Try and avoid removing the
battery as this could short circuit the battery.
If the battery is completely discharged, it may take a few
seconds before the charging indicator appears on the
display or before any calls can be made (the telephone
may be used during the charging process)
Before the
mobile
can be used, the battery must be
charged for a minimum of 4 hours.
After inserting the SIM card and charging the battery, the
mobile will search the registered network or any other
SETTING UP