1
2
3
4
5
Quick User Guide
Please refer to our website:
www.geemarc.com
for an up to date user
guide, as there may be important updates and changes you need to be
aware of !
Congratulations!
Congratulations on purchasing your
Geemarc AMPLIDECT COMBI 595
telephone. This telephone offers all the advantages of cordless technology
(compliant with Digitally Enhanced Cordless Telecommunications- DECT
standard) together with an easy to see big button keypad, ideal for those
who suffer with poor sight. This telephone is also hearing aid compatible.
It is important that you read the instructions below in order to use your
Geemarc telephone to its full potential.
1 Telephone base, 1 Corded handset, 1 cordless Handset, 2 power adapters,
1 Charger, 1 Telephone line cord, 3 Ni-Mh batteries, 1 Quick user guide.
Connecting the telephone
Connect the telephone cable to the telephone line socket
(A)
and to the
telephone wall socket
(B)
.
Connect the handset curly cord to the base(
E
).
Connect the power adapter jack to base and charger
(C)
then connect the
power adapter plug in mains power
(D)
.
NOTE:
Use only the power adapters supplied with the phone.
Connecting the battery
Slide the battery cover downwards Install the
3 batteries into the socket as indicated,
matching correct polarity (+,-).
Align the cover flat against the battery
compartment, and then slide it upwards until
it clicks into place.
Charging the batteries
Charge the batteries for at least 16 hours when charging for the first time.
Base overview
1 LCD DISPLAY
2
IN USE :
ON during a call.
3
RING light
●
Flashes
when there is an incoming call.
●
Steadily on
when the answering machine is turned on. Flashes
when there are new memos or messages in the answering machine.
4
MENU / OK
●
In idle mode:
Press to access the main menu.
●
In sub-menu mode:
Press to confirm the selection.
●
In Redial list/Call list:
Press to store the number into Phonebook
.
5
PHONEBOOK:
●
In idle:
Press to access the phonebook.
6
CALLS (CALL LIST)
●
In idle mode:
Press to access the call list.
7
INT / MUTE / CLEAR
●
In main menu mode:
Press to go back to idle screen.
●
In sub-menu mode:
Press to go back to previous level.
●
In sub-menu mode:
Press and hold to go back to idle screen.
●
In editing / predialing mode:
Press to clear a character/digit.
●
In editing / predialing mode:
Press and hold to delete all the
character / digits.
●
During a call:
Press to mute / unmute the microphone.
●
In ringing:
Press to silence the base ringer.
●
In idle mode:
Press to intercom another system handset.
8 MEMORY KEYS (3 PHOTO SPEED DIAL KEYS; 1 TONE KEY -
M4
●
In idle mode:
Press to dial out to the number stored in the
memory key.
●
During a call:
press M4 to increase the high frequency or the low
frequencies.
9
VOLUME BOOST / SOS
●
During a call:
Press to activate/deactivate the
VOLUME BOOST
function.
●
In idle mode:
Press and hold for 2 seconds to launch the
emergency calling sequence set in your phone.
●
In SOS mode:
press and hold for 2 seconds to stop the
emergency call.
10
SPEAKER
●
In Idle mode or Phonebook/ Call list/ Redial list view mode:
Press to make a call with speakerphone.
11 ALPHANUMERIC KEYPAD, STAR ( ), HASH/RECALL ( /R)
●
In predial or editing mode:
Press to insert a digit.
●
0 key in predial or editing mode:
Press and hold to insert a
pause.
●
On line:
Press the key R/ to make a recall.
12 NAVIGATION KEYS
▲
UP
●
In menu mode:
Press to scroll up the menu items.
●
In Phonebook list / Redial list / Call list:
Press to scroll up the list.
●
In editing mode:
Press to move the cursor one character to the
right.
●
During a call or TAM message playback:
Press to increase the
volume.
REPEAT / OGM
●
In Idle mode:
Press and hold 2 sec until beep to record OGM.
●
Press
/
to stop the recording.
●
In TAM message playback mode:
Press to go back to previous
message.
MEMO / SKIP FORWARD
●
In Idle mode:
Press and hold 2 sec until beep to record a memo
and press
/
to stop the recording.
●
In TAM message playback mode:
Press to skip to next message.
DOWN / REDIAL LIST
●
In Idle mode:
Press to access the redial list.
●
In menu mode:
Press to scroll down the menu items.
●
In Phonebook list / Redial list / Call list view mode:
Press to
scroll down the list.
●
In editing mode:
Press to move the cursor one character to the left.
●
During a call or TAM message playback:
Press to decrease the
volume.
13
/ PLAY / STOP
●
In Idle mode:
Press to playback messages.
●
During TAM message playback:
Press to stop playing messages.
14
SLOW
●
During TAM MSG playback:
Press to playback messages in slow
speed.
15
DELETE
●
In TAM message playback mode:
Press to delete the current
TAM message playback.
●
In idle mode:
Press and hold to delete all old messages.
16
ANS ON / OFF
●
In Idle:
Press to switch the answering machine
ON
or
OFF
.
●
The cassette tape icon is displayed on the screen if activate.
Handset overview
17 EARPIECE
18 LCD DISPLAY
19
CHARGE LIGHT
●
Steadily on when the handset is charging in the charger.
20
MENU / OK
●
In idle mode:
Press to access the main menu.
●
In sub-menu mode:
Press to confirm the selection.
●
During a call:
Press to access Intercom/ Phonebook / Redial list
/Call log/Record call.
21
UP / CALL LIST
●
In idle mode:
Press to access the redial list.
●
In menu mode:
Press to scroll up the menu items.
●
In phonebook list / redial list / call list:
Press to scroll up the list.
●
In editing mode:
Press to move the cursor one character to the
right.
●
During a call:
Press to increase the listening volume.
●
During ringing:
Press to increase the ringer volume.
22
TALK ON / SPEAKERPHONE
●
In idle/pre-dial mode:
Press to make a call in earpiece mode.
●
In phonebook/redial list /call list:
Press to make a call to the
selected entry in the list in earpiece mode.
●
During ringing:
Press to answer a call in earpiece mode.
●
On line:
Press again to pass in speakerphone mode. Press
again to switch to earpiece mode.
23
DOWN / PHONEBOOK
●
In idle mode:
Press to access the phonebook.
●
In menu mode:
Press to scroll down the menu items.
●
In phonebook list / redial list / call list:
Press to scroll down the list.
●
In editing mode:
Press to move the cursor one character to the left.
●
During a call:
Press to decrease the listening volume.
●
During ringing:
Press to decrease the ringer volume.
24 MICROPHONE
25
VOLUME BOOST / SOS
●
During a call:
Press to activate/deactivate the
VOLUME BOOST
function.
●
In idle mode:
Press and hold for 3 seconds to enter the
emergency calling sequence set in your handset.
●
In SOS mode:
press and hold for 2 seconds to stop the
emergency call.
26
TONE
●
During a call:
Press this key to increase the high frequency or
the low frequencies.
27
CANCEL / MUTE
●
In main menu mode:
Press to go back to idle screen.
●
In sub-menu mode:
Press to go back to previous menu.
●
In editing/pre-dial mode:
Press to delete a character / digit.
●
In editing/pre-dial mode:
Press and hold to delete all the
characters / digits.
●
During a call:
Press to mute/resume the microphone.
●
In idle mode:
Press to intercom another handset.
28
TALK OFF
●
During a call:
Press to end a call and go back to idle screen.
●
In menu / editing mode:
Press to go back to idle screen.
●
During ringing:
Press to silence the handset ringer.
29 ALPHANUMERIC KEYPAD, STAR ( ), 0, and HASH/RECALL
(
R
)
●
In predial or editing mode:
Press to insert a digit / character
and
R
.
●
During a call:
Press and hold
R
to make a Flash (Recall).
●
0 key in idle / pre-dial mode / number editing mode:
Press
and hold to insert a pause.
First use of your handset
After you have inserted the batteries, the display asks you to select your
text language with the keys
▼
/
▲
, press
to valid.
Then enter the date with the keypad and validate by pressing
.
Then enter the correct hour with the keypad and validate by pressing
.
Then select your talking language with the keys
▼
/
▲
, press
to
valid.
General menu setting
The phone settings are always set in the same manner:
Press
button to open the main menu.
Then use
▼
/
▲
buttons to select an entry and confirm it by pressing the
button.
The factory preset PIN code is
0000
. Example:
Set the display language on the base
Press
MENU/OK
, then select
▼
/
▲
language, press
MENU/OK
,
then select
▼
/
▲
desired language and then press
MENU/OK
to confirm.
Set the language on the handset
Press
MENU/OK
, then select
▼
/
▲
HS settings, press
,
then select
▼
/
▲
language, press , than select
▼
/
▲
desired language and
then press
to confirm.
Base menu
CALL LOG:
►
Incoming call list
PHOTO MEM:
►
M1
►
M2
►
M3
►
M4
PHONEBOOK:
►
ALL
►
SPEED DIAL
►
VIP
CALL BLOCK:
►
BLACK LIST
►
SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM:
HANDSET 1-2-3 or ALL
DATE & TIME:
►
DATE FORM
►
TIME FORM
►
SET DATE
TEXT LANG:
►
ENGLISH
►
FRANÇAIS
►
DEUTCH
►
ITALIANO
►
NEDERLANDS
►
ESPANOL
►
PORTUGUES…
BS SETTING:
►
RING SETUP
►
KEY TONE
►
FLASH TIME
►
FIRST
RING
►
DEFAULT
PAGE ALL HS
REGISTER
SET SOS:
►
SOS NUMBER
►
SOS MSG
►
SOS LANG
REMINDER:
►
ALARM 1
►
ALARM 2
►
ALARM 3
►
ALARM 4
►
ALARM
5
►
ALARM 6
►
ALARM 7
►
ALARM 8
►
ALARM 9
►
ALARM 10
TLK DIGITS:
►
OFF
►
ON
ANS. SYS:
►
PLAYBACK
►
DEL OLD
►
MEMO
►
TAM ON/OFF
►
SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Handset menu
CALL LOG:
►
RECEIVED
PHOTO MEM:
►
M1
►
M2
►
M3
►
M4
PHONEBOOK:
►
ALL (ADD-VIEW-EDIT-DELETE-DELETE ALL-ADD
VIP-ADD TO PM-ADD TO SD-STATUS)
►
SPEED DIAL
►
VIP
CALL BLOCK:
►
BLACK LIST
►
SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM:
►
BASE or HANDSET X
BS SETTING:
►
BS RINGER
►
RING VOL
►
FLASH TIME
►
FIRST RING
HS SETTING:
►
RING SETUP
►
TONE SETUP
►
AUTO BOOST
►
TEXT
LANG
►
DATE & TIME
►
REGISTER
►
DEFAULT
SET SOS:
►
SOS NUMBER
►
SOS MSG
►
SOS LANG
REMINDER:
►
ALARM 1
►
ALARM 2
►
ALARM 3
►
ALARM 4
►
ALARM
5
►
ALARM 6
►
ALARM 7
►
ALARM 8
►
ALARM 9
►
ALARM 10
TLK DIGITS:
►
ON
►
OFF
ANS. SYS:
►
PLAYBACK
►
DEL OLD
►
MEMO
►
TAM ON/OFF
►
SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Registration
NOTE:
Handset and base station are pre-registered. Up to four
handsets can be registered to a single base station.
Registration a handset
On Base:
Press
MENU/OK
, select
▼
/
▲
REGISTER
.
Press
MENU/OK
to see
REGISTERING...
(If the registration is
successful, there will be a confirmation beep).
On Handset:
Press
. Use
▼
/
▲
to select
HS SETTING
.
Press
. Use
▼
/
▲
to select
REGISTER
.
Press
and
REGISTERING
is display.
After a short delay, if the registration is successful, there will be a
confirmation beep, and the handset display will go back to idle mode with
the new handset number shown. The base display will also go back to
idle mode.
Internal Call
On Base:
Press
, and
▼
/
▲
to select
HS 1 - 4
.
Press
MENU/OK
to call the handset.
On Handset:
Press
CANCEL MUTE
, and
▼
/
▲
to select the
desired handset number,
Base
or
ALL
and press
MENU/OK
.
Call All Handsets
Base
: Press
, and
▼
/
▲
to select
ALL
, press
MENU/OK
to connect.
On Handset
: Make point 1 in chapter internal call and choose
ALL
.
Transfer an External Call
On Base:
Press
MENU/OK twice
, and
▼
/
▲
to select hanset
number, press
on handset. After connection quit the call on base.
Intercom
Menu setting
First use of your telephone
Overview
Installation
Package contents
