4.9.4
Delete the Entire Redial List
Using a handset:
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press
LEFT SOFTKEY
and
/
to select
DELETE ALL
.
3. Press
LEFT SOFTKEY
to confirm.
4. Press
LEFT SOFTKEY
to reconfirm.
4.10 Find the Handset
This feature helps you find the misplaced handset(s).
You can locate the handset by operation on the base station as below.
•
In idle mode, press
/
HANDSET LOCATOR
.
All the handsets registered to the base will produce the paging tone, and “PAGING” will
flash on the screen. You can stop the paging by pressing
/
/
/
RIGHT SOFTKEY
on any handset or
/
HANDSET LOCATOR
on the base to stop
paging.
NOTE:
If there is an incoming call during paging, the phone will ring with the incoming call
instead of paging.
4.11 Make an Internal Call
This feature allows you to make internal calls, transfer external calls and make
conference calls. If the called handset is not answered within 60 seconds, it will stop
ringing and the calling one will return to standby mode.
4.11.1
Intercom
Using a handset:
1. In idle mode, press
RIGHT SOFTKEY
and the numbers of the registered
handsets will display except the calling handset.
2. Enter the desired handset number you want to intercom with.
3. The called handset rings. Press
or
on the called handset to establish the
internal call.
Using the Handset
If you receive a call on the base in speaker mode, the call is automatically
transferred on the handset if the handset is removed from the base.
4.11.2
Call All Handsets
Using a handset:
1. In idle mode, press
RIGHT SOFTKEY
and the numbers of the registered
handsets will display except the calling handset.
2. Press
9
to ring to all registered handsets.
4.11.3
Transfer an External Call
Using a handset:
During an external call:
1. Press
LEFT SOFTKEY
and
/
to select
INTERCOM
.
2. Press
LEFT SOFTKEY
to select the desired handset you want to intercom
with.
3. The external call is put on hold automatically and the called handset rings.
4. Press
or
on the called handset to establish an internal call.
5. Press
on the calling handset or put the calling handset on the charging cradle to
end the current call with the external party.
6. The external call is transferred to the called handset.
4.11.4
Make a 3-way Conference Call
The conference call feature allows one external call to be shared with the corded
base and cordless handset or two cordless handsets. The three parties can share the
conversation and no network subscription is required.
Using a handset:
During the external call:
1. Follow Steps 1 to 4 in section 4.11.3.
2. Press and hold
on the calling handset to establish the conference call.
NOTE:
Any party (corded base or cordless handset) hangs up during a conference call will
leave the other party still in connection with the external call.
NOTE
:
If only one cordless handset is registered to the base station, internal call will not be
available.
18
19
US
E
YO
U
R
P
H
O
N
E