6
1 – Connecting the telephone
- Connect the handset cord (
1
).
- Open the battery compartment (
2
).
- Insert 4 alkaline batteries (type AAA 1.5V, not supplied) in
the comartment (
*
). Batteries are required if you wish to
increase the ringer level up to 10 dB (
2
).
- Snap the battery door back in place.
- Connect the line cord plug into the line socket on the rear of
the unit (
*
) (
3
).
- Connect the other end of the line cord into the wall PTT
socket (
*
) (
3
).
(*) Classified TNV-3 according to EN60950 standard.
2 – Ringer volume setting
A switch located on the right side allows the ringer to be
switched to Hi, Low or Off:
: Off,
: Low,
: Hi.
Note: The ring level will be increased of 10 dB if you insert
batteries.
Setting up
Summary of Contents for AmpliCL100
Page 2: ...1 ...
