manualshive.com logo in svg

Geely Emgrand 2015, Manual

The Geely Emgrand 2015 is a stylish and efficient vehicle that offers exceptional performance on the road. To make the most of your driving experience, download the free user manual from our website. This comprehensive manual provides detailed instructions and insights to ensure you maximize the potential of your Geely Emgrand 2015.

Share
Download
background image

1

2

3

4

5

6

7

8

In an Emergency  

149

2.

Insert a small flathead screwdriver into     
the port of the protective cover for the       
unlock  button  and  pry  it  off  from  the       
panel.

3.

Insert the screwdriver straight into the     
opening under the protective cover until     
the unlock button in the opening is      
pressed.

4.

You  can  move  the  shift  lever  while      
pressing and holding the unlock button.

Towing Vehicle

All  the  towing  operations  should  use  the      
safety chain system and abide by the local,       
provincial and national laws. The wheels     
and axles contacting the ground must be in       
a good condition. Once damaged, the con-      
verter dolly shall be used.

Hints for Towing

1.

When  using  the  flexible  towing  device     
(e.g. towing rope), the distance between     
towing  vehicle  and  the  vehicle  to  be      
towed should be greater than 4 meters      
and less than 10 meters. For the vehicle       
to be towed with a brake failure, a rigid        
towing device (e.g. towing bar) should     
be used to tow the vehicle.

2.

The hazard warning lights on the towing      
vehicle  and  the  vehicle  to  be  towed      
should be switched on.

3.

If  the vehicle  to  be towed  is  equipped       
with the VT2 continuously variable 

 

 

 

transmission,  please  pay  attention  to    
the following items:

•

   Shift the shift lever to the neutral posi-          

tion (N).

•

   Don't tow the vehicle at the speed of          

more than 50 km/h.

•

   The towing distance must not exceed        

50 kilometers.

When using a dedicated towing vehicle, it is       
only allowed to lift the front wheels of the        
vehicle to towed.

Never tow the vehicle with the VT2      
continuously variable transmission 

 

and its front wheels landing on the ground       
from the rear of the vehicle, otherwise it will        
lead to serious damage to the transmis-      
sion.

Summary of Contents for Emgrand 2015







































































































































































































































Reviews:

No comments

Related manuals for Emgrand 2015

Bimmer Jakes FRONT HEADLIGHT LENS COVER Replacement Manual preview
FRONT HEADLIGHT LENS COVER
Brand: Bimmer Jakes Pages: 4
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
PEUGEOT 407 2010 Manual preview
407 2010
Brand: PEUGEOT Pages: 249
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
Connects2 adaptiv mini ADVM-BM1 Fitting & User Manual preview
adaptiv mini ADVM-BM1
Brand: Connects2 Pages: 4
Cadillac 2003 Seville Owner'S Manual preview
2003 Seville
Brand: Cadillac Pages: 402
Cobra BAK R294 Manual preview
BAK R294
Brand: Cobra Pages: 2
Qeedon Higlow Series Product Instruction preview
Higlow Series
Brand: Qeedon Pages: 2
Atera 080 705 User Information preview
080 705
Brand: Atera Pages: 3
Black Horse RB001BK Installation Instructions preview
RB001BK
Brand: Black Horse Pages: 5
Saab 32 025 603 Installation Instructions Manual preview
32 025 603
Brand: Saab Pages: 15
BMW FXX ATM Emulator User And Installation Manual preview
FXX ATM Emulator
Brand: BMW Pages: 5
Carcomm CMPC-22 Fujitsu-Siemens PocketLoox 410 Installation Manual preview
CMPC-22 Fujitsu-Siemens PocketLoox 410
Brand: Carcomm Pages: 2
Ford 1999 Crown Victoria Owner'S Manual preview
1999 Crown Victoria
Brand: Ford Pages: 208
CSL 41802 User Manual preview
41802
Brand: CSL Pages: 8

Brands by name

Popular brands

Load more brands