Geely EC715 2009, Workshop Manual

Page: 1974 / 2181

11.15.2 Description and Operation
11.15.2.1 Description and Operation
The time is displayed as a 24-hour clock on the LCD screen.
Even if the engine is shut down, the time is still displayed. set
the time Through the time adjustment button (Refer to
11.15.4.1 Component Locator ).
Clock error is less than ±10 s per month.
Trigger Clock Settings
Pressing and holding (greater than 2 s) the time adjustment
button, it will enter the clock setting mode. The number of hours
and a colon blink at 1Hz frequency. This mode is hours
configuration mode. When the hour is set, the number will no
longer blink.
Set Up Hours
In the hours setting mode, the number of hours will increase
with a short rod press (more than 300 ms and less than 2 s). If
press and hold the adjustment rod more than 2 s, the number
of hours will increase at 5 h/s rate.
If the rod is not pressed in 5 s, it will enter the minutes setting
mode. The number of minutes and a colon blink at 1 Hz
frequency, as described above.
Set Up Minutes
In the minutes setting mode, the number of minutes will
increase with a short rod press (more than 300ms and less than
2 s). If press and hold the adjustment rod more than 2 s, the
number of minutes will increase at 5 h/s rate.
If the rod is not pressed in 5 s, the setting mode will end, the
clock will not blink.
11-490 Instrument Cluster Body Electric
EC718/EC718RV EC715/EC715RV 10/2009