5
6
ASSEMBLING THE MINCER
3
1
2
MIXING GUIDE
Before switching on your stand mixer, make sure the knob is at OFF (0)
position and then attach the whisk, beater or dough hook.
Up to 500g of flour plus other ingredients can be processed in the bowl.
Follow the recommended quantities, processing time and speed as
indicated in user manual. Do not exceed the suggested processing speed
to avoid damage to the machine.
It is normal that the tool connector will rotated with the gear cover,
during the use of other attachments such as blender, food processor,
mincer, etc.
Make sure the outlet covers on the arm are well locked before using
your stand mixer.
NOTE
Auto stop
YOUR
STAND MIXER
WILL BE AUTOMATICALLY TURNED OFF
AFTER 15 MINUTES OF CONTINUOUS OPERATION. THIS CAN AVOID
POTENTIAL SAFETY PROBLEMS DUE TO PROLONGED USAGE.
1.
2.
3.
4.
5.
Before you start , make sure that you pick the desired attachment from following
and assemble according to user manual.
3
1
2
Always make sure mixer is
unplugged and setting control is
set to OFF (0).
Open food processor outlet cover.
Insert food processor. Turn the
food processor clockwise until
food processor locks into place.
Always make sure mixer is
unplugged and setting control is
set to OFF (0).
Open mincer outlet cover.
Insert mincer. Turn the mincer
counterclockwise until mincer
locks into place.
NOTE
9
OPTIONAL ATTACHMENTS
GeekChef offers a wide range of optional attachments such as the blender, food
processor or mincer that may be attached to the Stand Mixer attachment power
hub as shown here.
ASSEMBLING THE BLENDER
2
1
3
3
HOW TO USE
(CONT.)
7
8
10
11
12
Remove attachment by pressing
attachment upward as far as
possible. Turn the attachment
clockwise and pull to remove.
Open blender outlet cover.
Insert blender. Turn the blender
clockwise until blender locks into
place.
ASSEMBLING THE FOOD PROCESSOR
Plug mixer into wall outlet.
Select desired speed.
When finished, rotate speed
control to Off(0). Unplug from
outlet.
Slide out the pouring shield.
Press up on mixer release button.
Tilt mixer head up.
Always make sure mixer is
unplugged and setting control is
set to OFF (0).