Main (Right Button) Menu
•
Save Patch – Saves the current settings to the patch. Modify the name to create a new patch.
•
Delete Patch – Erase the current patch from the bank (unless it’s the only one)
•
Load Bank – Load a different bank
•
Save Bank – Save the current bank. Changing the name saves as a new bank.
•
Load Soundfont – Open a single soundfont and switch between/play its presets. Choosing “Save
Patch” while in this state will create a new patch in your bank that uses the current preset,
allowing you to manually add sounds to your banks. To go back to your bank, choose “Load
Bank”.
•
Effects – Allows you to modify the settings of the chorus and reverb effects units, and the gain
(volume) of the SquishBox. Changes affect all patches in the bank – save the bank to make
them permanent.
System (Left Button) Menu
•
Power Down – To protect the memory card of the SquishBox, this option should be used before
unplugging. Allow 30 seconds for complete shutdown.
•
MIDI Devices – This allows you to see the names of the MIDI devices currently plugged in to
the SquishBox, and attempt to reconnect any that are not responding.
•
WIFI Settings – Displays the current IP Address of the SquishBox. Tapping either button selects
options to scan for and connect to WIFI networks. You can also enable/disable the Remote
Link, which allows you to remotely control the SquishBox and edit its patches from another
computer using the
software.
•
Add From USB – If you have a USB flash drive connected, the SquishBox will search for any
soundfont files stored on it and copy them to its memory card. If you have soundfonts in
different folders on the flash drive the folder hierarchy will be copied as well.
SquishBox User Manual
page 4
