will appear on Geehy DAP USB Device as shown in Figure 1:
(Figure 1)
2)
The power supply of the target board can be controlled by the keys on the tool.The
tool is not powered in the default state.Press and hold the button for 3s,the red
light will be on to power the target board; Press and hold the button again for 3s,
the red light will be off to stop the power supply.
3)
Choose to use SWD or JTAG on keil.
a)
Click “Debug” on the “Options for Target”
, interface and then select
“CMSIS-DAP Debugger” as shown in Figure 2:
