To unlock the keypad:
1- Enter the programming mode by
pressing the
Program
key. "Loc" is
displayed.
2- Press
Up
arrow key.
3- Press
Pump 1
key.
4- Press
Light
key.
The "Lock" icon will disappear and the spa side control will
return to normal mode.
If the unlock process takes more than 15 seconds, the spa
side control will return to normal mode but the keypad will
remain locked.
Loc
1
The system automatically performs two filter cycles per day,
at 12-hour intervals. During a filter cycle, Pump 2 & blower
run for one minute, then Pump 1 runs at low speed for the
programmed number of hours. The ozonator is also acti-
vated and "Filter Cycle" icon is on.
To program a filter cycle, you must enter two parameters:
the start time of the cycle and its duration. If no filtering is
required, the duration must be set to "OFF". If continuous
filtering is required, the duration must then be set to "12:00".
To set the start time of the cycle:
1- Enter the programming mode by
pressing the
Program
key.
2- Select the
Filter cycle
start
parameter
by pressing the
List
key until "FIon"
is displayed.
3- Press
Enter
key to display the
current setting.
4- Use
Up
or
Down
arrow key
to
change setting.
5- Press
Enter
key to confirm the
new setting.
The spa side control will return to normal mode.
To set the duration of the cycle:
1- Enter the programming mode by
pressing the
Program
key.
2- Select the
Filter cycle duration
parameter by pressing the
List
key
until "FIdu" is displayed.
3- Press
Enter
key to display the
current setting.
4- Use
Up
or
Down
arrow key
to
change setting.
5- Press
Enter
key to confirm the
new setting.
The spa side control will return to normal mode.
Water temperature can be displayed in ˚F or ˚C.
To select the temperature display unit:
1- Enter the programming mode by
pressing the
Program
key.
2- Select the
Temperature unit
pa-
rameter by pressing the
List
key
until "Tu" is displayed.
3- Press
Enter
key to display the
current setting.
4- Use
Up
or
Down
arrow key to
change setting.
5- Press
Enter
key to confirm the
new setting.
The spa side control will return to normal mode.
FIon
10:15
11:30
CL
FIdu
1:00
2:00
CL
Filter cycle start time & duration
Temperature unit
C
F
Tu
1
2
2
1
2
2
CL
1
2
2
Keypad lockout
This function allows you to prevent unauthorized parameter
setting of the unit. The basic functions of the spa will remain
accessible (pump, blower and light outputs) but it will be
impossible to change the temperature Set Point, to override
the Economy mode or to enter the programming mode.
When the keypad is locked, the "Lock" icon will be displayed.
To lock the keypad:
1- Enter the programming mode by
pressing the
Program
key.
2- Select the
Keypad lockout
parameter
by pressing the
List
key until "Loc"
is displayed.
3- Press
Enter
key to display the
current setting.
4- Use
Up
or
Down
arrow key to
change setting.
5- Press
Enter
key to confirm the
new setting.
The spa side control will return to normal mode, with keypad
locked, and the "Lock" icon will be displayed.
On
OFF
Loc
CL
1
2
2
Economy mode start time & duration
Time of day
CL
2:20
pm
4:30
pm
The Economy mode allows you to lower the temperature
Set Point of the spa by 20˚F (11˚C) during a certain period
of the day. When in Economy mode, the "Economy Mode"
icon will be displayed.
To program the Economy mode, you must enter two
parameters: the start time and the duration. If the Economy
mode is not required, the duration must be set to "OFF".
You can manually override the current Economy status (on
or off) for the rest of the day by pressing the
Mode
key.
To set the start time of the Economy mode:
1- Enter the programming mode by
pressing the
Program
key.
2- Select the
Economy mode start
parameter by pressing the
List
key until "ECon" is displayed.
3- Press
Enter
key to display the
current setting.
4- Use
Up
or
Down
arrow key to
change setting.
5- Press
Enter
key to confirm the
new setting.
The spa side control will return to normal mode.
To set the duration of the Economy mode:
1- Enter the programming mode by
pressing the
Program
key.
2- Select the
Economy mode duration
parameter by pressing the
List
key
until "ECdu" is displayed.
3- Press
Enter
key to display the
current setting.
4- Use
Up
or
Down
arrow key to
change setting.
5- Press
Enter
key to confirm the
new setting.
The spa side control will return to normal mode.
This function allows you to set the internal clock of the
system.
The unit will keep time in memory for about 48 hours in
case of power failure.
To set the time:
1- Enter the programming mode by
pressing the
Program
key. "CL" is
displayed.
2- Press
Enter
key to display the
current setting.
3- Use
Up
or
Down
arrow key to
change setting.
4- Press
Enter
key to confirm the
new setting.
The internal clock will be adjusted and the spa side control
will return to normal mode.
11:00
pm
10:00
pm
ECon
CL
8:00
4:00
ECdu
CL
1
2
2
1
2
2
2
2
Filter Cycle
icon
Lock
icon
Economy Mode
icon
Temperature
unit
Program
key
Program Mode
icon
Enter
key
List
key
PROGRAMMING INSTRUCTIONS
Parameter summary
CL
Time of day
Flon
Filter cycle start
FIdu
Filter cycle duration
ECon
Economy mode start
ECdu
Economy mode duration
Tu
Temperature unit (˚F or ˚C)
Loc
Keypad lockout
9919-100058-C
1.800.78.GECKO
• E
Q U
I P P
E D W
I T H G E C K O ' S E X C L
U S I V
E •
Smart
Winter
Mode
TM
