Maintenance
Regular maintenance of your appliance will keep it safe and in proper working order.
1
. Before cleaning.
When not in use or before cleaning, always disconnect the appliance from the mains supply.
2.
Cleaning
.
Remove dead insects from the appliance once per week with the brush supplied. Gently
brush dead insects from grill. Do not use metal objects or stick fingers through safety screen.
Remove bottom cover by twisting sideways. Gently shake dead insects from appliance and
discard. Regularly clean the outside of the appliance with a soft cloth and dry it with a dry
towel. Do not immerse in water. Do not use harsh solvents to clean the plastic.
3.
Ventilation safety
slots
.
Always keep the ventilation safety slots on the front and rear of the appliance clear from
blockage. Failure to keep these vents clear may result in overheating.
4.
Damage check.
Always check that the appliance is in good working condition and all guards are secure.
Check the power supply cord and plug regularly for damage.
Lamp Replacement
IMPORTANT: Before replacing lamp, unplug unit from mains power and wait one minute.
1.
Remove catcher tray from bottom of unit. (Fig 1)
2.
Using a Philips Head screwdriver, remove two screws from lamp cover on the bottom
of unit (Fig 2).
3.
Gently twist anti-clockwise to unscrew and remove lamp (Fig 3).
4.
Remove and replace the lamp using spare lamp BZ10G.
5.
Reposition lamp bracket, insert and tighten screws. Replace catcher tray
4 Secombe Place Moorebank NSW 2170
Tel (02) 1300 360 211 Fax (02) 1300 360 484
Model: GKOBZ10
This appliance is weather resistant and suited to permanent outdoor installation
READ AND SAVE THESE INSTRUCTIONS
Rev May 2020
Carefully read this manual before using the Bug Zapper. Make sure that you know how to
operate the appliance. Maintain the appliance in accordance with the instructions to ensure that
it functions properly. If the appliance is to be used by a third party, this instruction manual
must be supplied. No liability can be accepted for any damage caused by non-compliance with
these instructions or any other improper use or mishandling.
Fig 1
Fig 2
Fig 3
