SETTING THE UPPER & LOWER LIMITS (some models)
Ascend desk is design to go to its minimum and maximum height, allowing its maximum
possible range. If you prefer to change the settings to a more narrow range, follow these steps:
Make sure the power is ON, and a number is shown in the LED display (if no number appears,
please follow the Reset procedure described in the USE section).
To Set the Upper-Limit Position:
Use the UP/DOWN buttons to move the base to the desired maximum-height position, press
the “M” button and release, then press the UP button and release. The LED display will flash “S –“.
Press and hold the “M” button (about 2 seconds) until the LED display changes to “999”.
The display will automatically return to the selected height. The new upper limit is now set.
To Set the Lower-Limit Position:
Use the UP/DOWN buttons to move the base to the desired minimum-height position, press
the "M" button and release, then press the DOWN button and release. The LED display will
flash "S -". Press and hold the "M" button (about 2 seconds) until the LED display changes
to "000". The display will automatically return to the selected height display, the upper and lower
limits are now removed.
A RESET procedure requires the desk base to full retract (beyond and lower limit set).
Please ensure that you have the proper clearance below the desk base.
After the upper and lower limits are set, the previous memory positions (1, 2, 3, 4) may be outside the
new range of movement. If so, reset the memory positions.
If you attempt to revise a previously set upper or lower limit and it is outside of the existing range,
you will need to remove the previously set upper/lower limits first.
ASCEND
TROUBLESHOOTING
HANDSET LOCK
To lock the handset:
Press and hold the “M” button (about 8 seconds) until the LED display switches to “S -“ and then to
“LOC”. Release the button.
To unlock the handset:
Press and hold the “M” button (about 8 seconds) until the LED switches from “LOC” to the height display.
Release the button.
