EN
4
B1255-001 © 08-2015
966.920.00.0 (00)
Maintenance
Structure of this document
Illustrations for this chapter are shown at
the end of this document. References to the
corresponding illustration sequences are
shown as follows:
Maintenance interval
The following maintenance work is required
as necessary or at the specified intervals at
the latest:
Activating cleaning mode
Activate cleaning mode with the Geberit
Service Handy or the Geberit Clean Handy.
To clean the urinal ceramic and the cover
plate, suppress the flush actuation for a few
minutes.
Cleaning
Clean the cover plate and sensor window
with a mild, liquid cleaning agent.
Replacing batteries
Used batteries are displayed as follows:
Prerequisite
Two new alkaline manganese batteries of
type AA, 1.5 V, are ready.
1
Remove the cover plate.
2
Replace the batteries.
Remove the battery box and
disconnect the cables.
Replace the batteries.
Connect the cables and install the
battery box.
3
Mount the cover plate.
Maintenance
Interval
Clean the surface of
the cover plate
Weekly
Clean the urinal
ceramic
Daily
Replace batteries
When the battery
indicator lights up
Have the basket filter
cleaned by a skilled
person
At least every
2 years
Aggressive and scouring cleaning
agents may damage the surface of
the cover plate and sensor window.
Never use aggressive cleaning
agents that contain chlorine or are
acidic, abrasive or corrosive.
LED in the
sensor
window
Meaning
Flashing
Battery voltage is low,
flush still actuates
Lights up
Battery is dead, flush no
longer actuates
Do not dispose of batteries in
domestic waste.
