Geberit RE 1, Operating Instructions Manual

Page: 14 / 262

Special safety notes
Operating instructions pipe deburrer RE 1
CAUTION
Risk of damage to the device from incorrect handling
`
Do not overload the tool
`
Use the transport case for transport and storage, and store the tool
in a dry room
`
Service the tool regularly and check it is functioning correctly
`
Have any malfunctions and damage repaired immediately by an
authorised specialist workshop
`
Have repair work and inspections performed by an authorised
specialist workshop. Only use original spare parts
DANGER
Fatal electric shock hazard
`
Do not operate the tool in wet and damp surroundings
`
Before using, always check the tool, mains cable and mains
connector for damage and ensure that the tool is functioning
`
Avoid bodily contact with grounded surfaces
`
Do not touch damaged mains cables or mains connectors. Have
them replaced immediately by an authorised specialist
`
Never alter a mains connector in any way. It must always fit easily
into the socket
`
Do not use adapters
`
Do not use the mains cable for purposes for which it was not
intended, to carry tools or hang them up, or to pull out the connector
`
Protect the mains cable from heat, oil, acids, sharp edges and
moving tool parts
`
When working outside, only use extension cables that are approved
for outdoor use
`
Unplug the mains connector before starting any maintenance work
on the tool
DANGER
Fire hazard due to flying sparks
`
Remove explosive, combustible and heat-sensitive materials from
the working area or protect them from flying sparks
`
Keep fire-fighting material accessible in buildings that can fall victim
to fire
`
In buildings that can fall victim to fire, ensure that there is a fire watch
on duty after work
B
284
-00
1
&BDC © 01
-20
0
8
14