Geberit Monolith Plus 131.222.SJ.5, User Manual

Page: 11 / 180

EN
11
B1111-003 © 07-2014
966.319.00.0 (02)
Product description
System description
The sanitary module is equipped with user
detection, an odour extraction unit and an
orientation light.
Soft-touch buttons are integrated in the
cistern lid and can be used to release a large
or small flush or activate the odour
extraction unit.
The integrated odour extraction unit
neutralises unpleasant odours in the WC
ceramic appliance.
Technical data
Operation
Control panel
1 Orientation light
2 Odour extraction unit indicator light
3 <Small flush volume> actuator button
4 <Large flush volume> actuator button
5 <Odour extraction unit> button
0
Using the Geberit Monolith Plus
When a user approaches the sanitary
module, the orientation light lights up and
the odour extraction unit starts up.
To release a flush, press the <Large flush
volume> actuator button for a large flush or
the <Small flush volume> actuator button
for a small flush.
Starting or stopping the odour
extraction unit
`
Press the <Odour extraction unit>
button.
Result
The odour extraction unit starts or stops.
While the odour extraction unit is running,
the odour extraction unit indicator light
blinks slowly.
Nominal voltage 100–240 V AC
Mains frequency 50–60 Hz
Operating voltage 4.1 V DC
Power consumption 5 W
Power consumption
standby
< 0.5 W
Mains connection Direct connection
via system plug with
flexible 3-wire
plastic-sheathed
cable
Flow pressure range 10–1000 kPa
0.1–10 bar
Flush volume factory
setting 6 and 3 l
The button functions may be
temporarily blocked due to high
electrostatic discharges.
The odour extraction unit shuts off
automatically after ten minutes
(factory setting).
1
3
4 5
2