EN
36
B1157-002 © 01-2015
966.475.00.0 (01)
Carrying out welding with the Geberit
electrofusion machine ESG 3
Prerequisite
• Pipes, fittings and welding joints are dry and free of dirt
• Pipes and fittings are prepared in accordance with the
installation manual for Geberit electrofusion couplings
• Pipe surfaces are prepared in accordance with the installation
manual for Geberit electrofusion tape for anchor point
DANGER
Danger of fatal electric shock
`
Do not weld wet or water-filled pipes
`
An isolation transformer must be included in the circuit
when carrying out electrofusion work in damp areas
`
Allow the Geberit electrofusion coupling or Geberit
electrofusion tape to cool down before conducting a
secondary welding procedure
WARNING
Risk of injury from burns
`
Do not touch the pipe, electrofusion coupling, plug
contacts or electrofusion tape during the welding
procedure or during the cooling-down phase
CAUTION
Faulty welding
`
The pipe to be welded must be kept in a tension-free
position during the welding procedure and the cooling-
down phase
`
Air draughts through the pipe interior must be avoided
