For additional technical assistance, call 800/TEC-TRUE (800-832-8783) or visit our website at chicagofaucets.com.
4
HyTronic
®
User Guide Installation Instructions
(continued)
Mounting of SSPS Generator
The SSPS Generator comes with all the components needed for
installation, however, some tools and supplies are not included.
• Basin Wrench
• Hand Drill
• Adjustable Wrench
• Adjustable Locking Pliers
Includes
• SSPS Generator Unit
• Electronics Module and Holder
• Green Power Adapter
• Hose
1. Connect SSPS unit.
Attach to faucet and
install water supply line.
4. Drill holes. Drill holes
for screw anchors.
2. Position SSPS under
sink. Carefully posi-
tion to allow connec-
tion of water lines
and wiring.
5. Secure SSPS to wall.
Insert anchors into holes
and mount SSPS unit
to wall with supplied
screws.
3. Mark holes. Position
mounting bracket
and mark mounting
holes.
6. Attach inlet hose to
supply and turn on
water. With water on,
check system
for leaks.*
9. Remove cover and
connect faucet wire
to
SSPS and secure into
wire harness.
7. Fully open supply
valve.
8. Remove all items
from sink.
11. Remove protective
covering from
sensor.
Wait for 15 seconds
for faucet to
calibrate to its
environment.
10. Attach the cover.
Faucet is ready to
run through pro-
gramming sequence.
IMPORTANT: Do not use pipe
dope on faucet and supply
connections. Possible solenoid
contamination could occur and will
void any warranty.
*For dual-supply SSPS models, connect the hot water supply line to the SSPS unit and the cold water
supply line directly to the faucet.
