Stand: 28.2.2002
Gedruckt: 06.02.2007
Stand: 28.2.2002
Gedruckt: 06.02.2007
Stand: 28.2.2002
Gedruckt: 06.02.2007
Stand: 28.2.2002
Gedruckt: 06.02.2007
1 2
Ge BE E + F Gm bH • ww w .oe m- pri nte r .co m • Ge BE Do k.N r .: SM AN -E- 567 -V0 .1 Mo dul ar The rm al Pri nte r GPT -15 78
3 Ins tal lat ion
3. 1 Se lf Te st M od e (a ls o B ur n- in an d H ex D um p m od es )
The GPT-1578 has a self-test mode that will print and cut a sample document . All
electrical and mechanica l portions of the printer are exercised and checked by this action,
except for the serial interface or paralle l interface componen ts.
3.1.1 SelfTest
To place the unit into self-test mode: turn power switch off, press and hold the
FEED push button switch and place the POWER switch in the ON position, then
release the paper feed switch. See Figure 10 - GPT-1578 Self-Test Printout for
an example of the self test printout. The self-test printout also shows pertinen t
informati on pertaini ng to operatio n of the printer.
3.1.2 Factory Burn-In Test
If the paper feed button is held for 4 seconds after power is turned on, the printer
will enter the Factory Burn-In Mode. A hundred shorter sheets (approxi mately 6")
will be printed. If a sheet is removed during the test, the test will stop.
3.1.3 Hex Dump printing mode
If the paper feed button is held for 8-12 seconds after power is turned on, the
printer will enter the Hex Dump Mode. All codes received will be printed in HEX
format rather than causing normal execution , this may be useful for
troublesh ooting customer applicati ons.
3.1.4 Continuous Factory Burn-In Test
If the paper feed button is held for 12 seconds after power is turned on, the
printer will enter the CONTINUOU S Factory Burn-In Mode that does not stop
after 100 sheets are printed.
