Instruction Manual & Product Warnings
Manuel d’emploi et avertissements sur le produit pour la pièce GEARWRENCH
Manual de instrucciones y advertencias del producto de las piezas GEARWRENCH:
88777
88777 – ELASTIC LOOP TOOL TAILS 3PC
GEARWRENCH Elastic Loop Tails are only intended for use as part of a tethering system and use with tools meeting the following
specifications:
- Total tool weight under 10 lbs. (4.53kg)
- Tool includes a manufactured drilled tether through hole that the corded loop can be clinched to
- If tool does not include a manufactured tether through hole, a closed handled tool (for example found on scissors) that
the corded loop can be cinched to
Installation for closed handled tools
1. Weigh the tool to be used with the Elastic Loop Tail. The tool weight must be below the Elastic Loop Tails maximum working load
capacity of 10 lbs. (4.53kg)
2. Ensure the cinching of the Elastic Loop Tail to the tool will not interfere with the safe working condition of the tool
3. With the corded end of the Elastic Loop Tail pass the cord through the handle of the tool
4. Pass the swivel end of the Elastic Loop Tail through the loop of the cord
5. To create a secure connection pull tightly to cinch, and the connection point will be created
Installation for tools with existing pre-manufactured tether through holes
1. Weigh the tool to be used with the Elastic Loop Tail. The tool weight must be below the Elastic Loop Tails maximum working load
capacity of 10 lbs. (4.53kg)
2. Ensure the cinching of the Elastic Loop Tail to the tool will not interfere with the safe working condition of the tool
3. With the corded end of the Elastic Loop Tail pass the cord through the tether through hole of the tool
4. Pass the swivel end of the Elastic Loop Tail through the loop of the cord
5. To create a secure connection pull tightly to cinch, and the connection point will be created
WARNINGS:
- NEVER use GEARWRENCH Elastic Loop Tails to connect anything over 10 lbs. (4.53kg)
- GEARWRENCH Elastic Loop Tails are Not Personal Protective Equipment
- Always use GEARWRENCH Elastic Loop Tails with the recommended length of tethering accessories
- Do not use GEARWRENCH Elastic Loop Tails as part of a tethering system around moving or rotating equipment
- GEARWRENCH Elastic Loop Tails will not support human weight as part of a tether connection point
- Inspect GEARWRENCH Elastic Loop Tails for wear before each use. Do not use if evidence of wear.
MADE IN CHINA - LIMITED 1 YEAR WARRANTY FOR MANUFACTURING DEFECTS EXCLUDING NORMAL WEAR AND TEAR
