6. ADJUSTMENTS (continued)
15
6.7 KINETIC DIAGRAM OF MOTION
6.8 FILLING HOPPER
IMPORTANT!
- Take special care when you set up the spreading
width in order to avoid spreading in an area where you could
contaminate
fi
vers, streets and other cultivations or habitations.
Fill the hopper and prepare the spreading as follows:
●
Set the hydraulic opening lever in shut position
●
Switch the tractor engine off, disconnect the PTO, set the handbrake on and
remove the start-up key from the panel
●
Adjust the dosage by means of the levers by the discs.
●
Adjust the spreading width changing the vanes position or size
●
Fill the hopper with the fertilizer
●
Switch on the engine of the tractor and connect the PTO
●
Set the hydraulic opening lever in working position (open)
